T7Design Silicone Hose Straight Reducer - 38-25mm ID

T7Design Silicone Hose Straight Reducer - 38-25mm Inner Diameter, 3Ply, 102mm - Black

T7Design Silicone Hose Straight Reducer - 38-32mm ID

T7Design Silicone Hose Straight Reducer - 38-32mm Inner Diameter, 3Ply, 102mm - Black

T7Design Silicone Hose Straight Reducer - 38-28mm Inner Diameter, 3Ply, 102mm - Black

£6.89 £5.74
Availability: In stock
P/N
SHR-S-38-28-BLK

T7Design Silicone Hose Straight Reducer - 38-28mm ID, 3Ply, 102mm - Black

Our highly flexible silicone hoses are manufactured to the highest standard and are perfect for many applications including radiator pipes and air/intake pipes within modern engines. Depending on the diameter required, the hoses come with 3-5 ply of polyester fabric with a minimum wall thickness of 4.0mm. The hoses are available from 6mm to 152mm inside diameter sizes and all meet the requirements of SAE J20R1 Class A. Working Temperature -50°C to +180°C. Material Specification Silicone CompoundTested to BS903 at pressed cured for 5 minutes at +115°C. Hardness (IHRD) 65 + 5, Density (g/cm3) 1.26 + 0.03, Tensile strength (Mpa) 7 min, Elongation at break (%) 200 min, Tear strength (KN/m) 11 min, Compression set (%) 18 Max.

SpecificationMetricImperial & Other
Inside DiameterØ Ø
LengthØ102mmØ
Hose Wall ThicknessØ4.0mmØ
Working Pressure14.7 BAR214 PSI
Burst Pressure44 BAR642 PSI
Minimum Temperature-50 °C-58 °F
Maximum Temperature180 °C356 °F
ColourBlack
Angle
MaterialSilicone
Reinforcement3Ply
Conforms ToSAE J20R1 A
Country of ManufactureUnited Kingdom
Part NumberSHR-S-38-28-BLK
Silicone Material Specification
Specification
Tested to BS903 at pressed and cured for 5 minutes at 115°C.
Hardness (IHRD)65 + 5
Density (g/cm3)1.26 + 0.03
Tensile strength (Mpa)7 min
Elongation at break (%)200 min
Tear strength (KN/m)11 min
Compression set (%)18 Max
attention
ATTENTION
  • Please double check that you are ordering the correct diameter for your application prior to checkout.