T7Design Silicone Hose - 180° Elbow, 45mm ID, 3Ply, 152mm Legs - Black
Our highly flexible silicone hoses are manufactured to the highest standard and are perfect for many applications including radiator pipes and air/intake pipes within modern engines. Depending on the diameter required, the hoses come with 3-5 ply of polyester fabric with a minimum wall thickness of 4.0mm. The hoses are available from 6mm to 152mm inside diameter sizes and all meet the requirements of SAE J20R1 Class A. Working Temperature -50° C to +180° C. Material Specification Silicone CompoundTested to BS903 at pressed cured for 5 minutes at +115° C. Hardness (IHRD) 65 + 5, Density (g/cm3) 1.26 + 0.03, Tensile strength (Mpa) 7 min, Elongation at break (%) 200 min, Tear strength (KN/m) 11 min, Compression set (%) 18 Max.
Specification
Metric
Imperial & Other
Inside Diameter
Ø 45mm
Ø
Length
Ø152mm Legs
Ø
Hose Wall Thickness
Ø4.0mm
Ø
Working Pressure
14.7 BAR
214 PSI
Burst Pressure
44 BAR
642 PSI
Minimum Temperature
-50 °C
-58 °F
Maximum Temperature
180 °C
356 °F
Colour
Black
Angle
180
Material
Silicone
Reinforcement
3Ply
Conforms To
SAE J20R1 A
Country of Manufacture
United Kingdom
Part Number
SH-180-45-BLK
Silicone Material Specification
Specification
Tested to BS903 at pressed and cured for 5 minutes at 115° C.
Hardness (IHRD)
65 + 5
Density (g/cm3)
1.26 + 0.03
Tensile strength (Mpa)
7 min
Elongation at break (%)
200 min
Tear strength (KN/m)
11 min
Compression set (%)
18 Max
ATTENTION
Please double check that you are ordering the correct diameter for your application prior to checkout.
BRANDS 
ENGINEERING SERVICES 
CONTACT US 
ABOUT US 
