30107078A

Spal Brushless Radiator Fan - 10.0" (255mm) VA109-BBL330P/N-109A/SH 1424cfm 24v

30107087A

Spal Brushless Radiator Fan - 12.0" (305mm) VA89-ABL320P/N-94A 1804cfm 12v

Spal Brushless Radiator Fan - 11.0" (280mm) VA99-ABL315P/N-101A/SH 1447cfm 12v

£318.00 £265.00
Availability: In stock
P/N
30107059A
Logo
Logo
Logo
Logo
Logo

VA99-ABL315P/N-101A/SH - SPAL Brushless Electric Radiator Fan - 11" (280mm) - 30107059A

SPAL Automotive is a well renowned designer & manufacturer of high quality automotive electric radiator fans, founded in 1959 they have since become the supplier of choice for many high volume & specialist automotive manufacturers throughout the world. SPAL Automotive have extensive design, testing and manufacturing facilities that allow them to produce consistent high quality products that can withstand the most demanding conditions.

SPAL's latest generation brushless drive technology has become the ‘go to’ cooling solution for automotive applications – providing intelligent, software driven thermal management for cars, bus & coach engines, battery and hybrid engines, as well as oil cooling and air conditioning.

SPAL Brushless Fan Motors are IP6K9K and IP68 rated, this protection offers the highest stability, durability and lifelong performance for motors used in extreme working conditions. All IP6K9K and IP68 certified SPAL motors are Water Proof which means they are completely sealed and therefore protected against ingress of solid and liquid agents.

Specification Metric Imperial & Other
Airflow Max 2458 m3/hr 1447 cfm
Weight 2.2 kg 4.85 lbs
Blade Diameter ∅ 280mm ∅ 11"
Housing Diameter ∅ 306mm ∅ 12.05"
Housing Depth 76.95mm 3.03"
Speed Derating Threshold 105 °C 221 °F
Operational Fan Speed 950 - 3800rpm
Voltage 12v
Operating Supply Voltage Range 9 - 16v
Supply Voltage To Reach Max Speed 13 - 16v
Current Continuous 18 - 30.1a
Power Consumption 216 - 361.2w
Time From 0 To Full Speed 15 seconds
Motor Type Brushless (up to 40,000 hrs)
Protection IP6K9K and IP68 Certified
Warranty 36 Months
Manufacturer SPAL Automotive
Certifications UNI EN ISO 9001:2008, ISO TS 16949, ISO 14001
SPAL Type Number VA99-ABL315P/N-101A/SH
SPAL Part Number 30107059A
Fan Mounting

SPAL Brushless fans with diameters 255, 280, 305, 405 (mm) are designed with an “A” suction blade optimized to give the best efficiency in one direction only.

You can obtain both airflow directions out of the same fan simply by mounting the fan upside down.

SPAL recommend mounting a Brushless Fan within a cowling in order to cool the entire surface of the radiator/cooler and obtain the maximum efficiency available.

Wiring Information

As standard, the SPAL brushless fan is supplied with a 4 Pin Female Yazaki connector only, please see below for the correct part number for the male Yazaki connector kit and recommended wire diameters.

Wire Colour Annotation Use Recommended Wire Size
Red +D Drive Positive Supply 6.0mm²
Black -D Drive Negative Supply 6.0mm²
Yellow A Analogue Input 0.5mm²
White PWM* / E* PWM Input / Low Active Enable Input 0.5mm²
Yazaki Plug

SPAL Brushless fan Yazaki male connector kit: P/N - 30130628

Dimensions
VA99-ABL315PN-101A Dimensioned Drawing
Q & A

Q: Should I buy a SPAL fan?

A: SPAL have been around since 1959 and are the go-to manufacturer for OEM's and the aftermarket for ultra-reliable and high performance fans and blowers, their products are built to last. When a manufacturer offers a 36-Month warranty on their products then you know it's good quality.

Q: What fan size should I chose?

A: Go for the biggest fan you can fit to your radiator, if you have a slim and long radiator then it may be best to run twin fans, especially in warmer climates.

Q: How do I control the fan?

A: Basic control of SPAL brushless fans can be performed by a single on/off switch, analogue or digital signal. Please refer to the technical data sheet for further information on brushless fan control.

Q: Push or Pull?

A: Push fans sit in front of the radiator and push air through the core, Pull fans sit behind the radiator (usually the engine side) and draw air through the core.

SPAL Push or Pull
attention
ATTENTION
  • Prior to purchase please double check that you are ordering the correct voltage for your application.
  • Please refer to the technical data sheet before installation.