Honda K20/K24 Titanium Bosch Knock Sensor Adapter Kit

Honda K20/K24 Titanium Bosch Knock Sensor Adapter Kit

Our Titanium Knock sensor stud kits are made from high quality Grade 5 titanium alloy and are perfect for adaption to the Bosch Knock Sensor in the factory location on K20 and K24. Our studs feature a 5mm hex key tip to allow you to easily install them using an Allen Key/Wrench without damaging the threads. The kit looks fantastic and converts the old expensive single wire knock sensor to the Bosch Two Wire Knock Sensor.

Each kit contains the following components:

Our race spec Titanium hardware is manufactured from only the best aircraft grade Titanium Alloy; Ti-6AL-4V (Grade5), our fasteners are fully forged and the threads are created using a superior rolling process, this results in greater fatigue resistance and can reduce the potential of galling when fastening.

Grade 5 Titanium fasteners are suitable as replacement bolts for Grade 8.8 steel fasteners, they have a good strength to weight ratio and offer weight savings of approximately 45% over that of equivalent steel bolts. As well as the obvious weight savings, Titanium has outstanding corrosion resistance to a wide range of aggressive chemicals resulting in a longer service life over standard BZP steel bolts.

Universal M12-1.25 to M8-1.25 thread pitch fits many popular applications for Honda K20/K20 and other engines

Will fit many Honda/Acura DOHC Engines K20, K24, B16, B18, B20 etc

ATTENTION

• Please double check you are ordering the correct size for your application.
• Use of Blue Loctite is required on the M12x1.25 thread. Torque to 20Nm
• Please note The Bosch Knock Sensor is NOT included!