Calix Block heater US 480 115v

Calix Engine Block Coolant Pre-Heater

Calix Heaters are used to heat coolant to prevent premature wear at low starting temperatures. These can be used for transmissions, gearboxes, pumps, axles/differentials and engines. Using the calix cable system, you can install this in conjunction with an engine block pre heater to heat the coolant using one supply. Please view the Calix cables for bumper connections, breakouts/splitters, extension cables, plugs and more.

Low Watt Density. Liquids such as water, vegetable oils and salt baths can tolerate high power density heaters, any liquids with high viscosity or low thermal conductivity require low power density heaters. If the power density is too high, then the liquid or material will carbonise resulting in damage to the liquids being heated and the heater itself.

FEATURES & BENEFITS

• Compact and lightweight.
• Does not require the engine to be running whilst in use.
• Warming up the engine prior to start up reduces the level of wear on engine components.
• Reduces cold starting and cuts down fuel consumption.
• Reduce carbon dioxide and hydrocarbon emissions.
• Enables the warming of the engine where strict noise and emission restrictions are in place.

ATTENTION

• No parts of the installation must be allowed to come into contact with moving or hot parts of the engine.
• Calix engine heaters are not compatible with any radiator sealant, radweld, cooling system stop leak or other coolant leak repair additives. Using the heater in conjunction with these chemicals will invalidate the warranty.
• Please thoroughly read the provided instructions prior to use. Damage caused by incorrect installation, use or maintenance is not covered.
• If you have any questions or require further assistance, please do not hesitate to call or send us an email.