ATL Yellow Fuel Cell Safety/Baffle Foam - 300mm Cube

ATL Yellow Fuel Cell Safety/Baffle Foam - 300mm Cube

The ATL fuel cell safety/baffle foam is used in fuel cells to reduce fuel surge, aid fuel pick up and reduces risk of explosion from vapour ignition and fuel tank compression from impact. This ATL Yellow safety foam is included as standard with most ATL Saver Cell's (please refer to Saver Cell product listing) and in circumstances where the foam is being installed into aftermarket fuel cells, such as a custom manufactured tank or Nuke Performance's AluCell, we recommend the foam is installed into the tank in as few pieces as possible to prevent the foam from moving around within the tank. It is not recommended to install this foam into a fuel cell that cannot be disassembled or opened.

Safety foam is a vital component to the safety of the fuel system and as a result it is mandated by the FIA (FT3-1999 & FT3.5-1999). Its purpose is primarily a safety product which is an explosion suppression but also serves as an excellent baffle to minimise fuel surge. For high Ethanol content fuels such as E85, the Yellow safety foam is the most suitable, however it must be regularly inspected.

Do I need Yellow or Blue baffle foam?

• Yellow - For use with petrol or E85 Ethanol fuel (with E85 it is advisable to drain the fuel off if the vehicle is not in use).
• Blue - For use with Diesel, Methanol and Water.

Please note: ATL's safety/baffle foam is sold in 27 Litre cubic foot blocks (300mm x 300mm x 300mm). The foam can be supplied in custom shapes and quantities. Please contact us for further information.

Aero Tec Laboratories Ltd (ATL) design and manufacture world leading liquid containment devices and fluid transfer systems for Motorsport, Automotive, Aerospace, Defence, Marine and Industry. ATL Fuel Cells are the equipment of choice for almost all motorsport manufacturers across the world. ATL Fuel Cells can be found on the entire field of LMP1, LMP2, GTE, WTCC, DTM, Super GT, BTCC, GT3 and many more.

Features & Benefits

• Acts as a baffle and minimises fuel surge within the fuel cell.
• Reduces fuel cell capacity (3% displacement, 2% clingage).
• Explosion supression (fuel cell must be at least 80% foam-filled).
• Suitable for Motorsport requirements.

ATTENTION

• Please make sure you are ordering the correct foam for your fuel compatibility, Yellow or Blue.
• It is not recommended to install this foam into a fuel cell that cannot be disassembled or opened.
• Please make sure you are ordering the correct size and quantity prior to purchase.